[Back][Shopping Cart][Storefront]



[A2D Solutions]

DDB Unlimited ST-42DD

Indoor NEMA Enclosures




[Image: DDB Unlimited ST-42DD]




ST-42DD 42?H X 34?D / Indoor Cabinet

ST-42DD

  • 42?H X 34?D X 23?W
  • Adjustable 19? Racking
  • Powder Baked on Cream Paint
  • Lockable

The ST-42DD is a new design in communication cabinets, beingas rigid as steel & yet noticeably lighter than the old heavy steelconstructed cabinets. This is made possible with our own aluminumrecipe called Alumiflex™. The ST series are the most versatile cabinetsin the market place today. Being designed for our continuously changingindustry, the ST series is ahead of the competition in cost, weight andexpansion capabilities.

Unlike the steel cabinets, our ST-42DD, made of Alumiflex™,will operate without affecting or being effected by RF influences.Order our ST-42DD, the new industry standard, and take care of today’sneeds while at the same time preparing for tomorrow’s expansionrequirements.

General

Weight
79 Lbs.
Doors
Two – secured with non-intrusion locks
Locks and unlocks with a supplied set of keys
Designed to mount either left or right
Material
.1 Alumiflex™ (our own aluminum recipe)
Finish: Cream, textured, powder baked on paint
RF properties: Non-ferrous
Vents
Two – 8? X 10? standard filter panel housings
One removable filter panel per door
Solid panels can be used for non ventilation
Access Holes
One – One inch hole / with hole plug installed
Exterior Screws
Stainless with nylon locking nuts

Racking Specifications

Rails
Four standard (For additional rails see accessories)
Alodine coated
Holes tapped to accept standard 1032 screws
Each rail supported by two R-STRUTS™
.125 material (Alumiflex™)
Spacing
19? EIA STANDARD
Positioning
All rails fully adjustable from front to rear
Useable Height
42 inches
MAXIMUM: 12.75? TOTAL # OF RACK UNITS: 7
Useable Depth
Maximum: 33 11/16? Minimum 31 15/16? (see below)

*Section Starting & Ending PointsVertical Height Per sectionEffective Depth For Each Section
Top40.32?- 42.00?1.68?31 15/16?

25.00? – 40.32?15.32?33 11/16?
Center17.00? – 25.00?8.00?33 3/16?

1.68? – 17.00?15.32?33 11/16?
Bottom0.00? – 1.681.68?31 15/16?

Door Opening Clearance

Height
38 3/4 inches
Width
19 1/2 inches

Exterior Cabinet Dimensions

Main Body
Width: 23 1/4 inches
Height: 42 1/4 inches
Depth: 34 1/4 inches
Screws
Protrude 3/16 on each side
Total Space Occupied
Width: 23 5/8 inches
Height: 42 1/4 inches
Depth: 34 3/8 inches

Inside Clearance – LessRails

Width
21 3/16 inches
Height
42 inches
Depth
See racking spec’s – useable depth chart above

Ratings

NEMA Class Types Available
Class 250 Type 2
Paint Tested
500 Hour salt spray
500 hour immersion

Warranty

Period
15 Years – Unconditional



  
DDB Unlimited ST-42DD
Indoor NEMA Enclosures

 

Item#

ST-42DD0.00

ST-42DD 42?H X 34?D / Indoor Cabinet
  

[Previous Product][Next Product]




 

[GO] 

 

[GO] 

These WWW pages ©2014 A2D Solutions. All Rights Reserved.
A2D Solutions, Inc.   OLMG v2.02 ©1998-2000 The Fedele Group of Companies