A2D Solutions : Equipment Racks & Edit Consoles : DDB Unlimited - In-Door Cabinets : DDB Unlimited ST-30DD

DDB Unlimited ST-30DD

Indoor NEMA Enclosures

ST-30DD 30?H X 34?D / Indoor Cabinet

30?H X 34?D X 23?W
Adjustable 19? Racking
Powder Baked on Cream Paint
Lockable

General

Weight

69 Lbs.

Doors

Two – secured with non-intrusion locks
Locks and unlocks with a supplied set of keys
Designed to mount either left or right

Material

.1 Alumiflex™ (our own aluminum recipe)
Finish: Cream, textured, powder baked on paint
RF properties: Non-ferrous

Vents

Two – 8? X 10? standard filter panel housings
One removable filter panel per door
Solid panels can be used for non ventilation

Access Holes

One – One inch hole / with hole plug installed

Exterior Screws

Stainless with nylon locking nuts

Racking Specifications

Rails

Four standard (For additional rails see accessories)
Alodine coated
Holes tapped to accept standard 1032 screws
Each rail supported by two R-STRUTS™
.125 material (Alumiflex™)

Spacing

19? EIA STANDARD

Positioning

All rails fully adjustable from front to rear

Useable Height

30 inches

Useable Depth

Maximum: 33 11/16? Minimum: 31 15/16? (see below)

	*Section Starting & Ending Points	Vertical Height Per section	Effective Depth For Each Section
Top	28.32?- 30.00?	1.68?	31 15/16?
	19.00? – 28.32?	9.32?	33 11/16?

Center	11.00? – 19.00?	8.00?	33 3/16?
	1.68? – 11.00?	9.32?	33 11/16?

Bottom	0.00? – 1.68	1.68?	31 15/16?
*Sectionmeasurements start from the bottom of the cabinet (0.00?) & run vertically upward towards the top of the cabinet (30.00?)