[Back][Shopping Cart][Storefront]



[A2D Solutions]

Allen & Heath MixWizard

Audio Mixers




[Image: Allen & Heath MixWizard]




Now upgraded to WZ3 status, the 20Sremains a favourite mixer for small broadcast studios, internet radiostations , project studios and stereo sub-mixing anywhere. Featuringthe new WZ3 preamp and responsive EQ, the WZ3 20S provides 12 channelswith no fewer than 4 mono and 18 stereo sources.




The WZ3:16:2 is a versatile, easy touse 16 mic/line chaThe WZ3:16:2 is a versatile, easy to use 16 mic/linechannel mixer - the next generation of this industry standardmulti-purpose design Please note: The method of editing thedigital FX software in the MixWizard 16 and 12 mixers has changed. Tocheck which method you need to use to edit FX parameters, please seebelow. For MixWizard version 2 and some version 3 mixers with serialnumbers commencing with any of these prefixes, W21602.. W21202..W31602.. W31202.. ..the editing software may be downloaded here: WizardFX Editor Software For MixWizard version 3 mixers with serial numberscommencing with these prefixes: W31622.. W31222.. …there is currentlyno proprietary Allen & Heath software editor. However, the effectsparameters can be edited via MIDI using a WZ FX Graphical UserInterface that runs within Stardraw Control, which may be downloadedfrom the Stardraw website here: Stardraw Control Please note before youdownload the GUI, that you will need Stardraw Control to make anychanges to the parameters. Please also note that you will need to haveMicrosoft’s ‘.NET Framework’ installed. The GUI which runs withinStardraw Control may be downloaded here.WZ FX Ed V2 If you wish to editthe parameters using your own hardware and software, please read :ThisDocument which describes the MIDI implementation of the parameters.




The WZ3:14:4:2 is a remarkably dynamiccompact mixer, with multifunctionality that allows it to be used forFOH, monitors, and live or studio recording.




Allen & Heath is proud to presentthe WZ 12M, an easy-to-use compact mixer for on-stage monitoring. Thegrowth of personal headphone monitoring has led to a huge increase indemand for mixers with multiple stereo mix outputs. Wizard Monitor hasbeen developed to embrace modern on-stage mixing, and joins the GL2800Min Allen & Heath’s successful monitor desk range. The mixer allowsmusicians to easily control their own mixes on stage, while the mixerwill also be at home in rehearsal rooms and studios. 6 stereo mixes or12 mono wedge outputs - or a combination of mono and stereo - are fedfrom 16 mono mic/line inputs. The mixer features the crystal-clear WZ3preamplifier, passive microphone splitter and 4-four band EQ, with allmix masters on faders and colour-coded in pairs for easy identification.




With the same functionality as itslarger sister models, the WZ3:12:2 embodies the ultimate multipurposecompact mixer, with 2 extra dual stereo inputs for stereo sources suchas keyboards or CD players. Please note: The method of editingthe digital FX software in the MixWizard 16 and 12 mixers has changed.To check which method you need to use to edit FX parameters, please seebelow. For MixWizard version 2 and some version 3 mixers with serialnumbers commencing with any of these prefixes, W21602.. W21202..W31602.. W31202.. ..the editing software may be downloaded here: WizardFX Editor Software For MixWizard version 3 mixers with serial numberscommencing with these prefixes: W31622.. W31222.. …there is currentlyno proprietary Allen & Heath software editor. However, the effectsparameters can be edited via MIDI using a WZ FX Graphical UserInterface that runs within Stardraw Control, which may be downloadedfrom the Stardraw website here: Stardraw Control Please note before youdownload the GUI, that you will need Stardraw Control to make anychanges to the parameters. Please also note that you will need to haveMicrosoft’s ‘.NET Framework’ installed. The GUI which runs withinStardraw Control may be downloaded here.WZ FX Ed V2 If you wish to editthe parameters using your own hardware and software, please read :ThisDocument which describes the MIDI implementation of the parameters.




Available free from Allen & Heath,WinDR System Manager is a WindowsTM 95 / 98 / 2000 / NT4 applicationprovided with the DR128 and DR66 digital installation mixers. WinDRprovides an intuitive graphical interface for setting up the DR128/DR66and is mainly used for configuring the unit’s signal processing, whichcannot be done from its front panel. During configuration the DR unitis connected to a PC via RS232 serial link (cables can be up to 3m inlength). Once configured, the DR128/DR66 operates as a stand-aloneunit, not requiring a PC. WinDR can also be used ‘Offline’, so aDR128/DR66 installation can be designed or modified without having theDR128/DR66 physically connected to the PC and the configuration can besaved on disk until the DR128/DR66 becomes available [alternatively useDR Gateway via an IP network to connect to the DR].




This is an incredibly useful piece ofsoftware to keep on your notebook PC for setting up and checking audiosystems. You can download a FREE, fully working 14 day trial ofthe software and if you decide you want to keep using your RTA,registration is just £6.25 (less than US$10). Click here if youwant to register now.




  
Allen & Heath MixWizard
Audio Mixers

 

Item#

 

WIN-DRCALL0.00
WZ3-12:2CALL0.00
WZ3-12MCALL0.00
WZ3-14:4:2CALL0.00
WZ3-16:2CALL0.00
WZ3-20SCALL0.00

Allen & Heath MixWiz
  

[Previous Product][Next Product]




 

[GO] 

 

[GO] 

These WWW pages ©2014 A2D Solutions. All Rights Reserved.
A2D Solutions, Inc.   OLMG v2.02 ©1998-2000 The Fedele Group of Companies