[Back][Shopping Cart][Storefront]



[A2D Solutions]

Mogami Snake

Cable




[Image: Mogami Snake]




Mogami Snake Cables (MulticoreMicrophoneCables)

Snake Cables

Mogami multicore cables are designed for the highestlevelof audio performance and feature superb electrical andmechanicalcharacteristics while remaining compact, superflexible andeasy to use.

  • Individually twisted shielded pairs, available in 2 to48channels.
  • XLPE (Cross Linked Polyethylene) insulation providessuperbelectrical characteristics and will not melt or shrink backduringsoldering.
  • Rugged and flexible construction that is easy tohandle,even at temperatures down to -20°C (-4°F).
  • Easy cable identification system:
    • Channel numbers are printed and underlined on eachcorejacket to ensure correct identification, regardless of which endisstripped.
    • Outer jackets of each pair are colour coded bystandardresistor colour code, allowing quick identification ofconductor pairs.
    • Inner conductors are also colour coded based ontheinternational standard resistor colour code. Each pair is colourcodedby jacket and conductor colour combination.
  • Each channel has a drain wire and served (spiral)barecopper shield. The drain wire simplify termination and can becrimpedby the same size contact as the inner conductor pair.
  • CL2 rated version available. Conductor size of CL2ratedversion is thicker #25AWG so that it is also recommended forruggedapplication and firm and easier crimp terminal connector wiringas wellas NEC fire regulation requirement.

STANDARD VERSION
Part No.No. of ChannelsOv. Dia. (Approx. mm)Jacket Thickness (Approx. mm)Weight (kg/100m)(kg/328Ft)Maximum Length available
W29302-ch7.5(0.295")1.0(0.039")7506m (1,659Ft)
W29314-ch8.6(0.339")1.0(0.039")9
W29328-ch11.5(0.453")1.2(0.047")18
W293312-ch14.3(0.563")1.5(0.059")28
W293416-ch15.8(0.622")1.5(0.059")32305m (1,659Ft)
W293519-ch17.0(0.669")1.7(0.067")40
W293624-ch20.0(0.787")2.0(0.079")46
W293727-ch20.5(0.807")2.0(0.079")58
W293832-ch21.7(0.854")2.0(0.079")63
W293948-ch26.0(1.02")2.0(0.079")97200m (656Ft)

CABLE CORE SPECIFICATIONS
Conductor30/0.08A(0.15mm²)#26AWG            (30×#40AWG)
Insulation1.0Ø XLPE (CrossLinkedPolyethylene)      (0.039")
Drain Wire7/0.18TA(0.18mm²)#25AWG              (7×#33AWG)
Served ShieldApprox. 58/0.10A Served (spiral) Shield
Jacket (Covering)2.8ØFlexiblePVC                                            (0.110")
IdentificationSee core number identification table

Figure (1)

ELECTRICAL & MECHANICAL CHARACTERISTICS
DCResistanceat 20°CInner Pair Conductor0.13W/m(0.040W/Ft)
Shield0.031W/m(0.0095W/Ft)
Capacitanceat1kHz, 20°C (Partial Capacitance Value) See Figure (1)K0130pF/m(40pF/Ft)
K112pF/m(3.7pF/Ft)
Inductance0.6µH/m(0.18µH/Ft)
ElectrostaticNoise(Hum Pick-up)*2.5mV Max.
ElectromagneticNoiseat 10kHz*
   (Inductance of the toroidal core: 595µH)
0.1mV Max.
Microphonics*
   Method: Stepping on cable
50mV Max. at 50kWLoad
VoltageBreakdownMust withstand at DC 500V/15sec.
InsulationResistanceat DC 125V, 20°C100000 MW×m Minimum
TensileStrengthof one pair (26°C, 65% RH)274N
EmigrationNon-emigrant to ABS resin
ApplicableTemperature-20°C~ +70°C(-4°F~+158°F)
StandardUL13 CL2X 60°C / UL 20002 AWM30V60°C VW-1
* Using standard testing methods of Mogami Wire &CableCorp.

CL 2 RATED VERSION
Part No.No. of ChannelsOv. Dia. (Approx. mm)Jacket Thickness (Approx. mm)Weight (kg/100m)(kg/328Ft)Maximum Lengths available
W30402-ch7.8(0.307")1.0(0.039")8305m (1,659Ft)
W30414-ch9.0(0.354")1.0(0.039")10
W30428-ch12(0.472")1.2(0.047")19
W304312-ch14.6(0.575")1.3(0.051")29
W304416-ch16.3(0.642")1.4(0.055")36
W304519-ch17.5(0.689")1.7(0.067")44
W304624-ch20.5(0.807")2.0(0.079")57
W304727-ch21.0(0.827")2.0(0.079")63
W304832-ch22.4(0.882")2.0(0.079")73
W304948-ch27.0(1.063")2.0(0.079")104200m (656Ft)

CABLE CORE SPECIFICATIONS
Conductor7/0.18A(0.178mm²)#25AWG                (7×#33AWG)
Insulation1.05Ø XLPE (CrossLinkedPolyethylene)   (0.0413")
Drain Wire7/0.18A (Exactly same as conductor)
ShieldApprox. 58/0.10A Served (spiral) Shield
Jacket (Covering)2.8ØFlexiblePVC                                             (0.110")
IdentificationSee core number identification table

Figure (2)

ELECTRICAL & MECHANICAL CHARACTERISTICS
DCResistanceat 20°CInner Pair Conductor0.11W/m(0.0336W/Ft)
Shield0.031W/m(0.0095W/Ft)
Capacitanceat1kHz, 20°C (Partial Capacitance Value) See Figure (2)K0140pF/m(42.7pF/Ft)
K112pF/m(3.7pF/Ft)
Inductance0.6µH/m(0.18µH/Ft)
ElectrostaticNoise(Hum Pick-up)*2.5mV Max.
ElectromagneticNoiseat 10kHz*
   (Inductance of the toroidal core: 595µH)
0.1mV Max.
Microphonics*
   Method: Stepping on cable
50mV Max. at 50kWLoad
VoltageBreakdownMust withstand at DC 500V/15sec.
InsulationResistanceat DC 125V, 20°C100000 MW×m Minimum
TensileStrengthof one pair (26°C, 65% RH)274N
EmigrationNon-emigrant to ABS resin
ApplicableTemperature-20°C~ +70°C(-4°F~+158°F)
StandardUL13 CL2 60°C
* Using standard testing methods of MogamiWire& Cable Corp.

CORE NUMBER IDENTIFICATION TABLE
Core No.Color of One of the PairCore Jacket ColorCore No.Color of One of the PairCore Jacket ColorCore No.Color of One of the PairCore Jacket Color
1BrownBlack
(White)
17PurpleBrown
(White)
33OrangeOrange
(Black)
2Red18Gray34Yellow
3Orange19White35Green
4Yellow20BlackRed
(White)
36Blue
5Green21Brown37Purple
6Blue22Red38Gray
7Purple23Orange39White
8Gray24Yellow40BlackYellow
(Black)
9White25Green41Brown
10BlackBrown
(White)
26Blue42Red
11Brown27Purple43Orange
12Red28Gray44Yellow
13Orange29White45Green
14Yellow30BlackOrange
(Black)
46Blue
15Green31Brown47Purple
16Blue32Red48Gray

  • Colour identification is based on the resistor colour code.
  • Colours indicated in parenthesis indicate the printcolouron the core jacket.
  • Insulation colour of other wire in all pairs is clear.
  • Colour of outer cable jacket is black.
  • How to read core jacket channel numbers
    Each number printed on the core jacket is underlined (as shown below)inorder to prevent mis-reading of cable numbers.

EXAMPLE
1)means SIX 2)means NINE 3)means EIGHTEEN, not EIGHTY-ONE

ASSEMBLY OF SNAKE CABLE
Snake Assemblies
  • Customised connections and cable assemblies are availabletospecial order.
  • Connection diagram and detailed specification sheetarenecessary for all order.
  • Delivery: 4 weeks excluding shipping time.



  
Mogami Snake
Cable

 

Item#

 

SNAKECALL0.00

Mogami Snake
  

[Previous Product][Next Product]




 

[GO] 

These WWW pages ©2020 A2D Solutions. All Rights Reserved.
A2D Solutions, Inc.   OLMG v2.02 ©1998-2000 The Fedele Group of Companies