[Back][Shopping Cart][Storefront]



[A2D Solutions]

Prime ImageTBC/Freeze II - Model 50II

Time Base Correctors




[Image: Prime ImageTBC/Freeze II - Model 50II]


Prime Image

The Prime Image Model 50II is a high-quality, multi-featured TBC / synchronizer ideally suited to a wide variety of video production applications. In addition to offering full transcoding of composite and component signals in and out, the Model 50II provides full proc amp controls and many extra features usually found in units costing considerably more. For example the Model 50II offers automatic gain control (AGC on/off) horizontal position, vertical color advance (1,2 or 3 lines), horizontal chroma-to-luma adjustments, three levels of detail enhancement, variable rate strobe, and ultra-stable freeze (frame or field). Options available for 3-way adaptive comb filtering, hot switch, and DC power.Control Options:R1 Remote Control - RS232 handheld remote control for all Prime Image products with an RS232 port.R2 Remote Control - RS232 rack mountable remote control for all Prime Image products with an RS232 port.

Standard Features:

  • Composite Y/C in and out
  • Transcodes Composite and Component inputs to all outputs
  • Inputs may be synchronous or non-synchronous
  • Works with all VCRS
  • AGC on/off
  • Vertical color advance – 1, 2 or 3 lines
  • Horizontal Chroma-to Luma adjust
  • Detail enhancement – 3 levels
  • Ultra-stable freeze (frame or field)
  • Variable rate strobe

    Specifications:

    Video Interface

    Input, Composite1.0Vpp, 75 Ohm, BNC
    Input, Y/C (S-Video)4-pin connector
    3/4 DUB Cable-C Cable, option
    Output, Compostie1.0 Vpp, 75 Ohm, BNC
    Output, Y/C (S-Video)4-pin connector
    Genlock InHigh Impedance, 75 Ohm BNC
    RS232 Interface25-Pin D, option

    Performance (Each Channel)

    Window625 Line, PAL; 525 Line, NTSC or PAL-M
    Bandwidth5.5 MHz
    SNR58dB
    Differential Phase< 1º
    Differential Gain< 2%
    Sampling8-bit Luma, 8-bit Chroma (CCIR-601,4:2:2)
    Residual Time Base Error±15 nsec.
    Composite Auto BypassIf AC Power or Power Supply Fails

    Operation Controls

    Input SelectY/C, Composite, YRB
    Freeze SwitchOff / Field / Frame
    StrobeField or Frame, Variable Rate
    Enhance SwitchNormal / High / Low
    AGCOn/Off
    Video Level Control±6 dB
    Color Level Control±6 dB
    Set-up Level Control±10 IRE
    Hue (NTSC only)±45°
    V-Color Advance1, 2 or 3 lines
    H-Chroma / Luma Adjust±1 usec.
    H-Position±2 usec.
    H-Phase Adjust±1 usec.
    Burst Phase Adjust+360°
    Go To Black & WhiteOn/Off
    Genlock IndicatorLED (Green)
    Power On IndicatorLED (Red) One per unit

    Environmental (Full Unit)

    Operating Temperature+32° F (0° C) to 113° F(45°C)
    Operating Humidity10% to 95% RH, Non-Condensing
    Power Supply117VAC to 220VAC, 50 or 60Hz; DCOption: 12,24, 36, 48V ±25%
    Power Dissipation25 Watts
    Height1U / 1.75 inches (4.45 cm)
    Length19 inches (48.3 cm)
    Depth15 inches (38.1 cm)
    Weight16 lbs (6.8 Kg)




[DOCUMENT:*HTM*]

   
Prime ImageTBC/Freeze II - Model 50II
Time Base Correctors

 
Item#
 
FREEZE_II_-_MODECALL0.00

Prime ImageTBC/Freeze II - Model 50II
   

[Previous Product]




 
[GO] 

 
[GO] 

These WWW pages ©2008 A2D Solutions. All Rights Reserved.
A2D Solutions, Inc.   OLMG v2.02 ©1998-2000 The Fedele Group of Companies