[Storefront]

[A2D Solutions]




Mogami 110W AES/EBU digital audio cables


W3159
110W AES/EBU digital audio cables w3159

W3173
110W AES/EBU digital audio cables w3173

W3080
110W AES/EBU digital audio cables w3080

W3080-FC
FERRITE CORE
110W AES/EBU digital audio cables w3080
W3080-TB
FITTING TUBING FOR ITT CANNON XLR CONNECTOR
110W AES/EBU digital audio cables w3080
All of MOGAMI 110W AES/EBU digital audio cables are designed with flexibility and handy configuration. Many variations are available from regular application type up to long distance application types, from single core up to 12-core types, internal wiring type, and interconnect application types. Strict tolerance control of impedance within ±5% up to ±10% at the maximum.

Part No. W3159 W3228 W3080 W3135 W3173 W3160 ‾ W3163
Suggested Maximum
applicable length
150m
492Ft
300m
1000Ft
150m
492Ft

Part No. W3159 is for internal wiring material, Part No.3160 ‾ 3163 are multicore cables and other cables are for regular interconnect application. Part No. W3228 is compact size, flexible and durable cofiguration to meet tiny telephone plug cable clamp, therefore it is recommended for use with rough applications. And, Part No. W3173 is specially designed for long distance application assured over 300m.

However, above suggested maximum applicable length is based on use with any device that meets AES standard requirement without equalizer. In the case of use with an equalizer, the maximum applicable length can be expanded up to 1.5 times longer than assured length above. We have also prepared CAD program to see the changes of eye-diagram and transmitted wave form at the receiving end for various working conditions, so you can check it yourself at http://www.mogami-wire.co.jp/ before purchasing cables. Since AES/EBU digital audio cable is low capacitance characteristics, it can result in high quality analog audio transmission in general especially for high frequency range.

Bantam Patch Cord

110W AES/EBU digital audio cables pjd
Part No. PJD-12 PJD-18 PJD-24 PJD-36 PJD-48 PJD-60 PJD-72
Length 12"
30cm
18"
45cm
24"
60cm
36"
90cm
48"
120cm
60"
150cm
72"
180cm
Cable: Part No. W3228; Standard Color: Black only

SPECIFICATIONS
Configuration 110W AES/EBU digital audio cables diagram w3159 110W AES/EBU digital audio cables diagram w3228d 110W AES/EBU digital audio cables diagram w3080 110W AES/EBU digital audio cables w3080d 110W AES/EBU digital audio cables w3173d
Part No. W3159 W3228 W3080 W3135 W3173
No. of Conductor 2 2 2 2 2
Conductor Details 7/0.20A (7×#32AWG) 36/0.08OFC (36×#40AWG) 7/0.18A (7×#33AWG) 7/0.18A (7×#33AWG) 19/0.25A (19×#31AWG)
Size 0.22mm² (#24AWG) 0.18mm² (#25AWG) 0.178mm² (#25AWG) 0.178mm² (#25AWG) 0.932mm²
(#18AWG)
Insulation Ov. Dia.
(mm)
1.35Ø (0.053") 1.35Ø (0.053") 1.36Ø (0.054") 1.36Ø (0.054") 2.8Ø (0.110")
Material CPP XLPE XLPE XLPE CPP
Colors Red/Light green Red/Clear Red/Clear Red/Clear Red/White
Mono-
filament Filler
Ov. Dia.
(mm)
- - - 1.87Ø (0.0736")
Material Cotton LDPE (Clear)
Drain Wire Details 7/0.20A (7×#32AWG) - 7/0.18A (7×#33AWG) 7/0.18A (7×#33AWG) 20/0.18TA (20×#33AWG)
Size 0.22mm² (#24AWG) - 0.178mm² (#25AWG) 0.178mm² (#25AWG) 0.509mm²
(#21AWG)
Served Shield Approx. 79/0.10A
(Approx. 79/#39AWG)
Approx. 98/0.10A
(Approx. 98/#39AWG)
Approx. 60/0.12A
(Approx. 60/#37AWG)
Approx. 60/0.12A
(Approx. 60/#37AWG)
Approx.
100/0.18A
(Approx.
100/#33AWG)
Ov. Jacket Ov. Dia.
(mm)
3.2Ø (0.126"Ø) 4.8Ø (0.189"Ø) 5.0±0.3Ø
(0.197±
0.0118"Ø)
5.0±0.3Ø
(0.197±
0.0118"Ø)
7.8±0.5Ø
(0.307±
0.0197"Ø)
Material PVC PVC Flexible PVC Flexible PVC PVC
Color Black/Gray Black Black / Blue Black Black
Roll Sizes 50m (164 Ft) / 100m (328Ft) / 200m (656Ft) 77m (250 Ft) / 305m (1,000Ft) 300m (983Ft)
Weight 2kg/100m Roll 3kg/100m Roll 3.3kg/100m Roll 2.6kg/250m Roll 27kg/300m

ELECTRICAL & MECHANICAL CHARACTERISTICS

Part No. W3159 W3228 W3080
DC Resistance at 20°C Inner Cond. 0.081W/m(0.0247W/Ft) 0.1W/m(0.031W/Ft) 0.11W/m(0.034W/Ft)
Shield Cond. 0.024W/m(0.0073W/Ft) 0.025W/m(0.0076W/Ft) 0.028W/m(0.0085W/Ft)
Capacitance at 1kHz, 20°C
(effective capacitance value between inner twin)
46pF/m
(14pF/Ft)
53pF/m
(16pF/Ft)
46pF/m
(14pF/Ft)
Inductance 0.8µH/m (0.24µH/Ft) 0.8µH/m (0.24µH/Ft) 1.0µH/m (0.31µH/Ft)
Characteristic Imperdance 110W±10% 110W±5% 110W±5%
Attenuation (6MHz) 0.065dB/m
(0.020db/Ft)
0.069dB/m
(0.021db/Ft)
0.069dB/m
(0.021db/Ft)
Phase Constant (6MHz) 0.17rad/m 0.20rad/m 0.20rad/m
Electrostatic Noise* 50mV Max.
Electromagnetic Noise at 10kHz* 2.0mV Max.
Microphonics** 60mV 40mV Max. 40mV Max.
Voltage Breakdown Must withstand at DC 500V/15sec, 20°C
Insulation Resistance 10000 MW × m Min. at DC 250V, 20°C
Flex Life* 2,900 cycles 33,000 cycles 10,000 cycles
Tensile Strength 303N 441N 343N
Emigration Non-Emigrant to ABS resin
Applicable Temperature -20°C‾ +60°C(-4°F‾ +140°F)
Standard AES3-100X (ANSI S. 4. 40-199-X)
EBU Rech, 3250-E
CEI / IEC 958 / CCIR Rec. 647
AES3-100X (ANSI S. 4. 40-199-X)
EBU Rech, 3250-E
CEI / IEC 958 / CCIR Rec. 647
UL AWM 2623, 30V, 80°C, VW-1
AES3-100X (ANSI S. 4. 40-199-X)
EBU Rech, 3250-E
CEI / IEC 958 / CCIR Rec. 647

ELECTRICAL & MECHANICAL CHARACTERISTICS

Part No. W3135 W3173
DC Resistance at 20°C Inner Cond. 0.11W/m(0.034W/Ft) 0.02W/m(0.006W/Ft)
Shield Cond. 0.028W/m(0.0085W/Ft) 0.007W/m(0.0021W/Ft)
Capacitance at 1kHz, 20°C
(effective capacitance value between inner twin)
46pF/m
(14pF/Ft)
50pF/m
(15.3pF/Ft)
Inductance 1.0µH/m (0.31µH/Ft) 0.7µH/m (0.21µH/Ft)
Characteristic Imperdance 110W±5% 110W±10%
Attenuation (6MHz) 0.069dB/m
(0.021db/Ft)
0.0347dB/m
(0.0106db/Ft)
Phase Constant (6MHz) 0.20rad/m 0.17rad/m
Electrostatic Noise* 50mV Max.
Electromagnetic Noise at 10kHz* 2.0mV Max.
Microphonics** 40mV Max.
Voltage Breakdown Must withstand at DC 500V/15sec, 20°C
Insulation Resistance 10000 MW × m Min. at DC 250V, 20°C
Flex Life* 10,000 cycles 16,000 cycles
Tensile Strength 362N Over 980N
Emigration Non-Emigrant to ABS resin
Applicable Temperature -20°C‾ +60°C(-4°F‾ +140°F)
Standard AES3-100X (ANSI S. 4. 40-199-X)
EBU Rech, 3250-E
CEI / IEC 958 / CCIR Rec. 647
UL444, CM, 300V, 60°C, #25AWG
AES3-100X (ANSI S. 4. 40-199-X)
EBU Rech, 3250-E
CEI / IEC 958 / CCIR Rec. 647
UL AWM 2552, 30V, 60°C, VW-1, #18AWG
* Using standard testing method of Mogami Wire & Cable Corp.

Option: FERRITE CORE is available for Part No. W3080 and No. W3135 to eliminate EMI noise. FITTING TUBING for ITT CANNON XLR connector is available for Part No. W3080 and No. W3135 cable.
Multicore 110W AES/EBU Digital Audio Snake Cables

Back To Top

Like the world standard MOGAMI multicore microphone "Snake" cable, very flexible and compact design makes these multicore 110W AES/EBU DIGITAL AUDIO cables easy for wiring, installation and handling.
  • Because of employed cellular PP (polypropylene) insulation material, regardless of its compact overall diameter, larger conductor size is used, which naturally results in lower attenuation.
  • Besides, there are the following outstanding features similar to the standard analog multipair cables:
    • Easy cable core identification system, such as numbered cable core
    • Easy wiring assisted by the same conductor size drain wire
    • Flexible and good low temperature characteristic
W3160

freq kHz abs(z)ohm arg(z)rad atten npr/m phase rad/m
10 253.053778 -0.666284 0.000485 0.000617
20 186.122587 -0.559186 0.000611 0.000978
50 140.097832 -0.348423 0.00074 0.002038
100 127.900865 -0.206205 0.000811 0.003876
200 123.592395 -0.124331 0.000951 0.007596
500 120.029543 -0.080112 0.001498 0.018508
1000 117.020927 -0.0671 0.00236 0.036164
2000 114.290764 -0.0558 0.003866 0.070617
5000 111.573232 -0.04365 0.007263 0.173456
10000 110.521001 -0.0358 0.012238 0.351575

Part No.
Nos. of Cores.
O.D. (Approx. mm)
Jacket Thickness (Approx. mm)
Weight (Kg/100m)(Kg/328Ft)
Maximum Length available
W3160
2-CR
9.0 (0.354")
1.0 (0.039")
8
305m (1,000Ft)
W3161
4-CR
10.5 (0.413")
1.2 (0.047")
14
W3162
8-CR
13.8 (0.543")
1.4 (0.055")
23
W3163
12-CR
17.0 (0.669")
1.6 (0.063")
30

CABLE CORE SPECS

Configuration 110W AES/EBU digital audio cables w3160d
Conductor 7/0.20A (0.22mm²) #24AWG (7×#32AWG)
Insulation 1.35ØCPP (Cellular polypropylene) (0.053")
Drain Wire 7/0.20A (Exactly same as conductor)
Shield Approx. 79/0.10A Served (Spiral) Shield
Jacket (covering) 3.2Ø Flexible PVC (0.126"Ø)
Identification Similar to analog snake cable

ELECTRICAL & MECHANICAL CHARACTERISTICS
DC Resistance at 20°C Inner Pair Cond. 0.081W/m(0.0247W/Ft)
Shield 0.024W/m(0.0073W/Ft)
Capacitance at 1kHz, 20°C
(effective capacitance value between inner twin)
46pF/m(14pF/Ft)
Inductance 0.8µH/m (0.24µH/Ft)
Characteristic Imperdance 110W±10%
Attenuation (6MHz) 0.065dB/m (0.020db/Ft)
Phase Constant (6MHz) 0.17rad/m
Electrostatic Noise* 5.0mV Max.
Electromagnetic Noise at 10kHz* 2.0mV Max.
Microphonics* 60mV
Voltage Breakdown Must withstand at DC 500V/15sec
Insulation Resistance at DC 125V, 20°C 10000 MW × m Min.
Tensile Strength of one Core 303N
Emigration Non-Emigrant to ABS resin
Applicable Temperature -20°C‾ +70°C(-4°F‾ +158°F)
Standard AES3-100X(ANSI S.4.40-199X)
EBU Rech. 3250-E
CEI/IEC 958/CCIR Rec. 647
UL13 CL2X 60°C / UL20002 AWM 30V 60°C VW-1
* Using standard testing method of Mogami Wire & Cable Corp.